I. Milling chip morphology in different media When milling titanium alloy at high speed under different media, due to the different friction and heat dissipation conditions between the tool and the chip, the shape and surface condition of t....
Strategies for high-speed roughing and finishing of graphite electrodes are different. Generally rough machining should leave less allowance for finishing, so when using small diameter tools, high feeds (cutting and feed) should be used. On....
The machined titanium tool is made of Walter carbide insert end mill, grade ZDGT150416R-K85 WMG40, uncoated, diameter 25mm, corner radius r=1.6mm, two teeth, see Figure 1. The milling force test of high-speed milling of ferroalloy TC4 was c....
Customized injectors for precision drilling. The 9 balls on a single injector face the orifice, the diameter of the orifice is 0.055 x 1mm, and the tolerance is no more than 3 thousandths. The material to be processed is a superalloy 4169.....
In the inner chamber of a turbojet engine combustion chamber, each small black dot on the picture is a micro-hole that is inclined to the center of the cylinder. The material to be processed is nickel-based superalloy 4169 with a hole size o....