High Current Probes The probe diameter is between 2.54mm and 4.75mm. The maximum test current is up to 39 amps. Semiconductor Probes The diameter is generally between 0.50mm-1.27mm. Bandwidth greater than 10GHz, 50 characteristic Battery an....
1.Micro Series Probes The center distance between the two test points is generally 0.25mm to 0.76mm. 2.Switch Probes Switching probes have a single probe with two currents. 3.Coaxial Probes Used to test high frequency signals, with shielded....
The probe is the contact medium for electrical testing and is a high-end precision electronic hardware component. The main types of probes are: cantilever probes and vertical probes. Cantilever probe: Blade Type and Epoxy Type Vertical probe....
Test needles, also known as probes in the industry. It is divided into a spring pin (special pin) and a universal pin when used for PCB board testing. When the spring pin is in use, it is necessary to make a test die according to the wiring....
The interface needle is a functional test pin that only functions in connection and control switch functions. Kangding interface needle series mainly include IFP series 001, 002, 003, 004, 005, 006, 007 models. This product is IFP004 interfa....
Since it is aluminium alloy die-casting, it is not possible to cut aluminium directly, but need to melt aluminium into a fluid to facilitate subsequent molding in the die. When these metals become fluids, they can be injected into the die-ca....
In CNC machining, whether manual or automatic programming, process analysis of the machined parts before programming, formulate the process plan, select the appropriate tool, and determine the amount of cutting. In programming, some process....
Classification of bushing size benchmarks Classified by usage basis: 1. Bushing design basis. The points, lines, and faces used to determine the position of the part in the machine are called design references. 2. Bushing process benchmark.....
1. Bushing fixing Bushing, copper sleeve When the gear shaft is moving, try not to let it shift direction due to vibration. At this time, a copper sleeve is needed, and the bearing sleeve helps to fix it. The most important role of copper b....
The above-mentioned axial layered machining method is adopted, and the left and right thread faces are formed by cutting the left and right machining edges respectively. According to the process design method, two different finishing turning technolog....